DANTE AV AV-T

sketch：

characteristic:
Transmitting up to 4K/UltraHD 60p HDMI 2.0 video output, Dante AV Ultra is a hardware based solution that provides 4K60 video encoding and decoding, suitable for high-quality, visually lossless videos and embedded software based solutions.
Dante AV 4K-T can convert 4K/UHD/2K/HD/VESA SDI and HDMI to Dante AV Ultra signals, while Dante AV 4K-R supports converting Dante AV Ultra signals to 4K/UHD/2K/HD/VESA SDI and HDMI. This device provides unprecedented low latency and clock synchronization, ensuring perfect lip sync between the large screens on site and external broadcasts and streams. It can independently route audio and video streams.
By utilizing Dante AV compatible with 1 GigE network, more cost-effective conversion can be achieved and existing network infrastructure can be utilized.
The Dante AV solution is compatible with thousands of Dante supported audio products currently available.
Our advantage of using Audinate Dante Controller on Windows and macOS is the ability to put audio and video on the same platform and manage them uniformly through Dante Controller.
Access complete verification and execute HDCP 2.2 via IP.
Easily control remote devices through USB HID, serial interface, infrared transmission, and IP control (IR).
Use Power over Ethernet POE+(25W 802.3at POE+) or DC power supply (12V 4a).
HDMI 2.0 input (4K-T); HDMI 2.0 output (4K-R).


Technical parameters:
1: 1x network RJ45 interface -1 GigE (Dante AV&POE+).
2: 1x HDMI 2.0 input (4K-T) or 1x HDMI 2.0 output (4K-R): RGB, YCbCr, 4:4:4, 4:2:2, 8-bit, 10-bit, And 12 bit.
3: Supports 8-channel embedded DANTE audio through HDMI input/output.
4: Power supply: 12VDC and POE (+)
5: 1x 3PIN Phoenix socket (serial port).
6: 2x USB 2.0 Type C interface.
7: The front LED indicator lights can display: power supply, codec, system, status, synchronization, and HDCP.
8: Supports complete EDID.
9: HDCP processing.